CAMELEON is an automatic dosing system small and medium Fire power vehicles using CLASS A foam and / or CLASS B foam. CAMELEON is a low volume positive injection device with automatic regulation of dosing compared to a range of variable water flow and a concentration defined by the user by means suitable control screen.
CAMELEON DUAL is a system adapted to vehicles equiped with a water pump low pressure (15 bar) and high pressure (40 bar) to inject up 30 l/min of 2 different products with a concentration between 0.1 and 6%.
|Pump :||0.3 - 30 l/min in LP and 0.7 - 24 l/min in HP|
|Pressure :||15 bar in LP and 40 bar in HP|
|Dosage :||0.1 to 6%|
|LP water flow rate (DN65) :||50 - 2000 l/min (other flow rates possible)|
|HP water flow rate (DN40) :||35 - 350 l/min (other flow rates possible)|
|Power supply :||Electricity 24VDC (other voltages possible)|
CAMELEON DUAL starts up as soon as the battery master switch is turned on. Select one of the six concentrations will automatically prime the pump then inject the foam selected according to real time water flow. Single point positive injection system involves an immediat foam production. After intervention, CAMELEON DUAL automatically starts a flushing cycle.See the Diagram of operation
• Colour screen
• 6’’ display size
• Waterproof (IP68)
• Impact resistant
• Compact size
• Remote start-up
• Operating temperature between -20°C and +50°C
• Water flow rate
• Actual concentration
• Dosage icons
• Foam injection pressure
• Product tank levels with capacity
• Intervention report
• Fault log
• Training mode
• Customisable icons
• Remote start-up
• Secondary screen option is possible
• Download intervention report by bluetooth
• Several languages available
• CAN Open external link
• Can be fitted on all types of vehicles
• Delivered in a pre-mounted kit
• Compatible with all Class A and B products
• Easy to install
• Light weight and compact size
• Easy maintenance
• External suction
• Product tank filling from the ground
• Dosage of up to 4 differents products
• Several possible injection points
• Injection on LP or HP system
HIGH PERFORMANCE Injecting the product under pressure means CAMELEON DUAL can be used whatever the wate flow rate and pressure. Pre-mixing is performed in the truck without any pressure loss this allows fireman deployment to be far from the danger zones.
LP/HP MIXED USE CAMELEON DUAL allows the product to be injected either in the low pressure part of the water pump or the high pressure part, by using a selection switch. This means just one system is needed for LP/HP foam production.
The use of class A and B products makes fire extinguishing more effective and reduces firefighter intervention time.
The possibility of injecting the product directly from an external container increases the autonomy of the dosage system.
Installing tanks for class A and B products directly on the vehicle combined with the CAMELEON DUAL's tank filling function reduces product handling.
A training mode allows the equipment to be tested without foam use
CAMELEON DUAL dosing accuracy considerably reduces the amounts of product used during operations.
Quicker extinguishing means less water consumption.
• Easy start-up
• Didactic screen
• Frost protection