MPVE is a mechanical system with manual control to protect industrial sites requiring self-extinguishing foam solution. MPVE is an injection device under pressure of foam concentrate with fixed water flow rate.
MPVE pressurizes and injects the foam concentrate through a portable injector connected to hoses linked to the monitors.

MPVE 180 is a system with thermal drive to inject up to 180 l/min of foam with a concentration between 3 and 6%.

Technical features

Pump flow range : 90 to 180 lpm
Pump type : Piston
Suction : -0.6 bar
Pressure : 16 bar
Dosing range : 3 to 6%
Motorisation : Thermal
Product viscosity compatibility : < 220 Mpa.s at 20°c at 375 s-1 shear rate following the norm EN 1568-3:2018
Priming : Manual
Product type : Class B

Operating principle

After connection to the foam concentrate tank and once the thermal engine is started up, the MPVE draws up the foam concentrate via the recycling tank.
In standby, the liquid circulates in a closed loop, to prevent any risk of unintentional injection.
Set the manual valve on injection position allows the transfer of the foam concentrate under pressure into the water pipe via the injector inserted on the line.

See the Diagram of operation

System benefits

  • HIGH PERFORMANCE Injecting the product under pressure means MPVE can be used whatever the water flow rate and pressure. This means significant lengths of pipe can be used between the motor pump and the water line. The possibility to install the injector anywhere along the pipe allows firemen deployment to be far from the danger zones.

  • FUNCTIONAL • Volumetric pistons pump
    • Compatible with all foam concentrates
    • Stand-alone system
    • High level of autonomy
    • Easy maintenance

  • SIMPLE Implementing the system with a single valve to operate makes the MPVE accessible to everyone. An abacus helps the users to check if they have the correct ratio (foam concentration/water flow rate) to ensure an efficient foam application for great extinguishing.

  • EFFECTIVE Class B foam concentrate use on industrial fires means extinguishing will be faster and easier to cool down more effectively burning areas.

Custom design

Possibility of specific studies for this range

Contact us

Downloads